Files
decky-loader/contrib/deck.sh

336 lines
12 KiB
Bash
Executable File

#!/bin/bash
## Before using this script, enable sshd on the deck and setup an sshd key between the deck and your dev in sshd_config.
## This script defaults to port 22 unless otherwise specified, and cannot run without a sudo password or LAN IP.
## You will need to specify the path to the ssh key if using key connection exclusively.
## TODO: document latest changes to wiki
## Pre-parse arugments for ease of use
CLONEFOLDER=${1:-""}
INSTALLFOLDER=${2:-""}
DECKIP=${3:-""}
SSHPORT=${4:-""}
PASSWORD=${5:-""}
SSHKEYLOC=${6:-""}
LOADERBRANCH=${7:-""}
LIBRARYBRANCH=${8:-""}
TEMPLATEBRANCH=${9:-""}
LATEST=${10:-""}
## gather options into an array
OPTIONSARRAY=("$CLONEFOLDER" "$INSTALLFOLDER" "$DECKIP" "$SSHPORT" "$PASSWORD" "$SSHKEYLOC" "$LOADERBRANCH" "$LIBRARYBRANCH" "$TEMPLATEBRANCH" "$LATEST")
## iterate through options array to check their presence
count=0
for OPTION in ${OPTIONSARRAY[@]}; do
! [[ "$OPTION" == "" ]] && count=$(($count+1))
# printf "OPTION=$OPTION\n"
done
setfolder() {
if [[ "$2" == "clone" ]]; then
local ACTION="clone"
local DEFAULT="git"
elif [[ "$2" == "install" ]]; then
local ACTION="install"
local DEFAULT="dev"
fi
if [[ "$ACTION" == "clone" ]]; then
printf "Enter the directory in /home/user/ to ${ACTION} to.\n"
printf "The ${ACTION} directory would be: ${HOME}/${DEFAULT}\n"
read -p "Enter your ${ACTION} directory: " CLONEFOLDER
if ! [[ "$CLONEFOLDER" =~ ^[[:alnum:]]+$ ]]; then
printf "Folder name not provided. Using default, '${DEFAULT}'.\n"
CLONEFOLDER="${DEFAULT}"
fi
elif [[ "$ACTION" == "install" ]]; then
printf "Enter the directory in /home/deck/homebrew to ${ACTION} pluginloader to.\n"
printf "The ${ACTION} directory would be: /home/deck/homebrew/${DEFAULT}/pluginloader\n"
printf "It is highly recommended that you use the default folder path seen above, just press enter at the next prompt.\n"
read -p "Enter your ${ACTION} directory: " INSTALLFOLDER
if ! [[ "$INSTALLFOLDER" =~ ^[[:alnum:]]+$ ]]; then
printf "Folder name not provided. Using default, '${DEFAULT}'.\n"
INSTALLFOLDER="${DEFAULT}"
fi
else
printf "Folder type could not be determined, exiting\n"
exit 1
fi
}
checkdeckip() {
### check that ip is provided
if [[ "$1" == "" ]]; then
printf "An ip address must be provided, exiting.\n"
exit 1
fi
### check to make sure it's a potentially valid ipv4 address
if ! [[ $1 =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
printf "A valid ip address must be provided, exiting.\n"
exit 1
fi
}
checksshport() {
### check to make sure a port was specified
if [[ "$1" == "" ]]; then
printf "ssh port not provided. Using default, '22'.\n"
SSHPORT="22"
fi
### check for valid ssh port
if [[ $1 -le 0 ]]; then
printf "A valid ssh port must be provided, exiting.\n"
exit 1
fi
}
checksshkey() {
### check if ssh key is present at location provided
if [[ "$1" == "" ]]; then
SSHKEYLOC="$HOME/.ssh/id_rsa"
printf "ssh key was not provided. Defaulting to $SSHKEYLOC if it exists.\n"
fi
### check if sshkey is present at location
if ! [[ -e "$1" ]]; then
SSHKEYLOC=""
printf "ssh key does not exist. This script will use password authentication.\n"
fi
}
checkpassword() {
### check to make sure a password for 'deck' was specified
if [[ "$1" == "" ]]; then
printf "Remote deck user password was not provided, exiting.\n"
exit 1
fi
}
clonefromto() {
# printf "repo=$1\n"
# printf "outdir=$2\n"
# printf "branch=$3\n"
printf "Repository: $1\n"
git clone $1 $2 &> '/dev/null'
CODE=$?
# printf "CODE=${CODE}"
if [[ $CODE -eq 128 ]]; then
cd $2
git fetch --all &> '/dev/null'
fi
if [[ -z $3 ]]; then
printf "Enter the desired branch for repository "$1" :\n"
local OUT="$(git branch -r | sed '/\/HEAD/d')"
# $OUT="$($OUT > )"
printf "$OUT\nbranch: "
read BRANCH
else
printf "on branch: $3\n"
BRANCH="$3"
fi
if ! [[ -z ${BRANCH} ]]; then
git checkout $BRANCH &> '/dev/null'
fi
if [[ ${LATEST} == "true" ]]; then
git pull --all
elif [[ ${LATEST} == "true" ]]; then
printf "Assuming user not pulling latest commits.\n"
else
printf "Pull latest commits? (y/N): "
read PULL
case ${PULL:0:1} in
y|Y )
printf "Pulling latest commits.\n"
git pull --all
;;
* )
printf "Not pulling latest commits.\n"
;;
esac
if ! [[ "$PULL" =~ ^[[:alnum:]]+$ ]]; then
printf "Assuming user not pulling latest commits.\n"
fi
fi
}
pnpmtransbundle() {
cd $1
if [[ "$2" == "library" ]]; then
npm install --quiet &> '/dev/null'
npm run build --quiet &> '/dev/null'
sudo npm link --quiet &> '/dev/null'
elif [[ "$2" == "frontend" ]]; then
pnpm i &> '/dev/null'
pnpm run build &> '/dev/null'
elif [[ "$2" == "template" ]]; then
pnpm i &> '/dev/null'
pnpm run build &> '/dev/null'
fi
}
if ! [[ $count -gt 9 ]] ; then
printf "Installing Steam Deck Plugin Loader contributor/developer (for Steam Deck)...\n"
printf "THIS SCRIPT ASSUMES YOU ARE RUNNING IT ON A PC, NOT THE DECK!
Not planning to contribute to or develop for PluginLoader?
If so, you should not be using this script.\n
If you have a release/nightly installed this script will disable it.\n"
printf "This script requires you to have nodejs installed. (If nodejs doesn't bundle npm on your OS/distro, then npm is required as well).\n"
fi
if ! [[ $count -gt 0 ]] ; then
read -p "Press any key to continue"
fi
printf "\n"
## User chooses preffered clone & install directories
if [[ "$CLONEFOLDER" == "" ]]; then
setfolder "$CLONEFOLDER" "clone"
fi
if [[ "$INSTALLFOLDER" == "" ]]; then
setfolder "$INSTALLFOLDER" "install"
fi
CLONEDIR="$HOME/$CLONEFOLDER"
INSTALLDIR="/home/deck/homebrew/$INSTALLFOLDER"
## Input ip address, port, password and sshkey
### DECKIP already been parsed?
if [[ "$DECKIP" == "" ]]; then
### get ip address of deck from user
read -p "Enter the ip address of your Steam Deck: " DECKIP
fi
### validate DECKIP
checkdeckip "$DECKIP"
### SSHPORT already been parsed?
if [[ "$SSHPORT" == "" ]]; then
### get ssh port from user
read -p "Enter the ssh port of your Steam Deck: " SSHPORT
fi
### validate SSHPORT
checksshport "$SSHPORT"
### PASSWORD already been parsed?
if [[ "$PASSWORD" == "" ]]; then
### prompt the user for their deck's password
printf "Enter the password for the Steam Deck user 'deck' : "
read -s PASSWORD
printf "\n"
fi
### validate PASSWORD
checkpassword "$PASSWORD"
### SSHKEYLOC already been parsed?
if [[ "$SSHKEYLOC" == "" ]]; then
### prompt the user for their ssh key
read -p "Enter the directory for your ssh key, for ease of connection : " SSHKEYLOC
fi
### validate SSHKEYLOC
checksshkey "$SSHKEYLOC"
if [[ "$SSHKEYLOC" == "" ]]; then
IDENINVOC=""
else
IDENINVOC="-i ${SSHKEYLOC}"
fi
## Create folder structure
printf "Cloning git repositories.\n"
mkdir -p ${CLONEDIR} &> '/dev/null'
### remove folders just in case
# rm -r ${CLONEDIR}/pluginloader
# rm -r ${CLONEDIR}/pluginlibrary
# rm -r ${CLONEDIR}/plugintemplate
clonefromto "https://github.com/SteamDeckHomebrew/PluginLoader" ${CLONEDIR}/pluginloader "$LOADERBRANCH"
clonefromto "https://github.com/SteamDeckHomebrew/decky-frontend-lib" ${CLONEDIR}/pluginlibrary "$LIBRARYBRANCH"
clonefromto "https://github.com/SteamDeckHomebrew/decky-plugin-template" ${CLONEDIR}/plugintemplate "$TEMPLATEBRANCH"
## install python dependencies to deck
printf "\nInstalling python dependencies.\n"
rsync -azp --rsh="ssh -p $SSHPORT $IDENINVOC" ${CLONEDIR}/pluginloader/requirements.txt deck@${DECKIP}:${INSTALLDIR}/pluginloader/requirements.txt &> '/dev/null'
ssh deck@${DECKIP} -p ${SSHPORT} ${IDENINVOC} "python -m ensurepip && python -m pip install --upgrade pip && python -m pip install --upgrade setuptools && python -m pip install -r $INSTALLDIR/pluginloader/requirements.txt" &> '/dev/null'
## Transpile and bundle typescript
[ "$UID" -eq 0 ] || printf "Input password to proceed with install.\n"
sudo npm install -g pnpm &> '/dev/null'
type pnpm &> '/dev/null'
PNPMLIVES=$?
if ! [[ "$PNPMLIVES" -eq 0 ]]; then
printf "pnpm does not appear to be installed, exiting.\n"
exit 1
fi
printf "Transpiling and bundling typescript.\n"
pnpmtransbundle ${CLONEDIR}/pluginlibrary/ "library"
pnpmtransbundle ${CLONEDIR}/pluginloader/frontend "frontend"
pnpmtransbundle ${CLONEDIR}/plugintemplate "template"
## Transfer relevant files to deck
printf "Copying relevant files to install directory\n\n"
ssh deck@${DECKIP} -p ${SSHPORT} ${IDENINVOC} "mkdir -p $INSTALLDIR/pluginloader && mkdir -p $INSTALLDIR/plugins" &> '/dev/null'
### copy files for PluginLoader
rsync -avzp --rsh="ssh -p $SSHPORT $IDENINVOC" --exclude='.git/' --exclude='.github/' --exclude='.vscode/' --exclude='frontend/' --exclude='dist/' --exclude='contrib/' --exclude='*.log' --exclude='requirements.txt' --exclude='backend/__pycache__/' --exclude='.gitignore' --delete ${CLONEDIR}/pluginloader/* deck@${DECKIP}:${INSTALLDIR}/pluginloader &> '/dev/null'
if ! [[ $? -eq 0 ]]; then
printf "Error occurred when copying $CLONEDIR/pluginloader/ to $INSTALLDIR/pluginloader/\n"
printf "Check that your Steam Deck is active, ssh is enabled and running and is accepting connections.\n"
exit 1
fi
### copy files for plugin template
rsync -avzp --rsh="ssh -p $SSHPORT $IDENINVOC" --exclude='.git/' --exclude='.github/' --exclude='.vscode/' --exclude='node_modules/' --exclude='src/' --exclude='*.log' --exclude='.gitignore' --exclude='pnpm-lock.yaml' --exclude='package.json' --exclude='rollup.config.js' --exclude='tsconfig.json' --delete ${CLONEDIR}/plugintemplate deck@${DECKIP}:${INSTALLDIR}/plugins &> '/dev/null'
if ! [[ $? -eq 0 ]]; then
printf "Error occurred when copying $CLONEDIR/plugintemplate to $INSTALLDIR/plugins\n"
exit 1
fi
## TODO: direct contributors to wiki for this info?
printf "Run these commands to deploy your local changes to the deck:\n"
printf "'rsync -avzp --mkpath --rsh=""\"ssh -p $SSHPORT $IDENINVOC\""" --exclude='.git/' --exclude='.github/' --exclude='.vscode/' --exclude='frontend/' --exclude='dist/' --exclude='contrib/' --exclude='*.log' --exclude='requirements.txt' --exclude='backend/__pycache__/' --exclude='.gitignore' --delete $CLONEDIR/pluginloader/* deck@$DECKIP:$INSTALLDIR/pluginloader/'\n"
printf "'rsync -avzp --mkpath --rsh=""\"ssh -p $SSHPORT $IDENINVOC\""" --exclude='.git/' --exclude='.github/' --exclude='.vscode/' --exclude='node_modules/' --exclude='src/' --exclude='*.log' --exclude='.gitignore' --exclude='package-lock.json' --delete $CLONEDIR/pluginname deck@$DECKIP:$INSTALLDIR/plugins'\n\n"
printf "Run in console or in a script this command to run your development version:\n'ssh deck@$DECKIP -p $SSHPORT $IDENINVOC 'export PLUGIN_PATH=$INSTALLDIR/plugins; export CHOWN_PLUGIN_PATH=0; echo 'steam' | sudo -SE python3 $INSTALLDIR/pluginloader/backend/main.py'\n"
## Disable Releases versions if they exist
### ssh into deck and disable PluginLoader release/nightly service
printf "Connecting via ssh to disable any PluginLoader release versions.\n"
printf "Script will exit after this. All done!\n"
ssh deck@${DECKIP} -p ${SSHPORT} ${IDENINVOC} "printf $PASSWORD | sudo -S systemctl disable --now plugin_loader; echo $?" &> '/dev/null'